AGFEO AC 14 USB, Руководство пользователя, Страница: 64 / 76

C - 6 Communication through PC
Connections to Internet or other network
These instructions show you how to connect to the
Internet or other network with the Microsoft
remote data transmission network.
1. Open (double-click) the symbol „workplace“ on
the desktop.
2. Open (double-click) the symbol „DT network“.
The DT network is automatically installed as
standard in Windows 98. If the remote data
transmission network does not appear under
„workplace“, you can still install it. Select
„Start / setup / system control / software“.
Further information can be found in the
Windows Help index under „Software, install
components“.
3. If this is the first connection, click on
„continue“. Otherwise open (double-click)
„Create new connection“.
4. In Help enter a name for the connection eg the
name of your provider.
5. Under „Select device“ select „AGFWMP-Line 1“
and click on „continue“.
6. Enter the ISDN dialling number for your
Internet provider or the remote network and
click on „continue“.
7. Click on „complete“. A symbol for this
connection will appear.
Configure connection
1. If the remote data transmission network is not
open: Open (double-click) the symbol
„workplace“ on the desktop. Open (double-
click) the symbol „remote data transmission
network“.
2. Open the dialog window in which you can
configure your connection. Click with the right
mouse key on the symbol for the previously
installed connection and select „Properties“.
3. Activate the registration card „Server types“.
Execute the following steps:
. If you are setting up an Internet connection, de-
activate „Register with network“.
. Activate „software compression“.
. For connections to the Internet activate only
„TCP/IP“ as the protocol.
Dialling the Internet or other network
Once you have set up the connection to your
internet provider or the network as described you
can now dial into the corresponding network. If
you want to surf the net or access your e-mail you
must have a web browser or e-mail application
installed.
To connect, follow these steps:
1. Open (double-click) the symbol „workplace“ on
the desktop.
2. Open (double-click) the symbol „remote data
transmission network“.
3. Open (double-click) the symbol for the
connection set up previously
4. In the dialog window „connect to“ do the
following:
Input the name made available by your internet
provider and the code word.
Click on „connect“.
As soon as the connection is made the dialog
window „connected to“ appears.
5. You can now surf the internet with your web
browser or access your e-mails with an e-mail
application.
Disconnecting
To disconnect click on the dialog window
„connected to“ on „disconnect“.
If this window has minimised to a symbol, click on
the symbol in the task bar.