AGFEO AC 14 USB, Руководство пользователя, Страница: 41 / 76

P - 3 Programming
P
Programming the telecommunications system with a telephone
Programming with a telephone always involves
the steps:
- Start the programming mode,
- Input
- Exit the programming mode.
Listen to the dialling tones or pulses in the
earphone when programming. Wait after entering
every digit until the digit is dialled. You may hear
Starting the programming mode
In order to be able to change settings, you first
have to start the programming mode. Then you
can make all the settings for your
telecommunications system one after the other.
theAckn owledgement tone if your entry is valid or
the error tone (busy tone) if your entry is invalid.
Recommendation: Use a telephone with DTMF
dialling for faster programming.
If you use a telephone with handsfree facilities,
you can press the loudspeaker key instead of “Lift
handset” or “Replace handset”.
Input
After lifting the handset, enter
*
and the first
three letters of the name of the function or
*
and
the 3-digit code. Then enter other parameters (on
or off, phone numbers etc.). All entries for a
function are terminated by replacing the handset.
If you make an error, replace the handset and
start again from the beginning.
Lift
handset Start PRO PRO
PRO PRO
PROgramming mode
Entering the system PIN?
If you hear the short Acknowledgement tone after
*PRO
no system PIN is programmed in the
telecommunications system. It is not necessary to
enter the system PIN.
If you do not hear a tone after
*PRO
, a
system PIN is programmed in the
telecommunications system. Enter the 4-digit
system PIN. If the PIN is correct, you will hear
theAckno wledgement tone. If the PIN is wrong,
you will hear the error tone.
h * P R O q ª
Replace the
handset Acknowledgement
tone, otherwise enter
the system PIN
Notes on programming with a telephone
(system PIN)
N.B.! You cannot use the phone whilst you are in
the programming mode. You hear the
programming tone on lifting the handset.
Acknowledgement tone or error tone
If an entry is invalid, you will immediately hear the
error tone (busy tone). Replace the handset and
start again from the beginning.
You will hear the shortAc knowledgement tone
when all entries are clearly terminated and valid.