d-lab.2, d-lab.2plus, netlab.2plus: Preinstallation
Operation Site
AgfaPhoto
2005-05-01 / PN 04100_01
13
4.9
Operating Conditions
The following conditions must be met for operation of the Minilab:
Room temperature:
+15 °C to +30 °C
Relative humidity:
15% to 85%
Noise level:
< 70 dB(A)
Maximum ambient light:
P Paper Processor:
10,000 Lux
Paper magazines:
20,000 Lux
CAUTION!
This machine is a Class A equipment according to EN 55022. This equipment may
cause radio interference in residential areas. In this case the user may be required
to initiate respective measures and pay for those.
4.10 Conditions for Storage and Transport
The following conditions must be met for storage and transport of the Minilab:
Temperature range:
-50 °C to +60 °C
Relative humidity:
15% to 90%
4.11 Network
Connection
The Minilab can be connected to one Workstation in the lab. For communication it uses
the Software
d-workflow
/
d-bridge
, which must be installed in the Workstation. A
Workstation with this installation provides printable, externally created orders, which
were sent to the d-workflow / d-bridge, for collection by the Minilab.
And vice versa the Minilab can send image files to a workstation and save the files there.
Network setup is the responsibility of the customer. AgfaPhoto supplies the required
software (see
Ordering aid for network-connected image processing systems
).
