manualshive.com logo in svg

AGFA DX-G, Руководство пользователя, Страница: 10 / 96

Поделиться
Скачать
AGFA DX-G Скачать руководство пользователя страница 10

Intended Use

This device must only be used to scan exposed X-ray cassettes, containing an

erasable image plate (IP). The digitizer is part of a system, consisting of X-ray

cassettes with erasable phosphor image plates and a workstation where the X-

ray cassettes are identified and the resulting digital image information is

further processed and routed. It is intended that this device is only operated in

a radiological environment by qualified staff.

Related Links

Training

 on page 13

Intended User

This manual has been written for trained users of Agfa products and trained

diagnostic X–Ray clinical personnel who have received proper training.
Users are those persons who actually handle the equipment and those who

have authority over the equipment.
Before attempting to work with this equipment, the user must read,

understand, note and strictly observe all warnings, cautions and safety

markings on the equipment.

Related Links

Training

 on page 13

10

 | DX-G, DX-M | Introduction

2321G EN 20181126 1428

Содержание DX-G

































































































Отзывы:

Нет отзывов