manualshive.com logo in svg

AGFA Drystar Kiosk 5370/100, Руководство оператора, Страница: 26 / 100

Поделиться
Скачать
AGFA Drystar Kiosk 5370/100 Скачать руководство пользователя страница 26

Cleaning

To clean the exterior of the equipment:

1.

Stop the system.

CAUTION:

Wet cleaning of the equipment while it is connected to the

electric circuit includes the risk of electric shock and of short

circuit.

2.

Wipe the exterior of the device with a clean, soft, damp cloth. Use a mild

soap or detergent if required. Do not use any corrosive, dissolving or

abrasive cleaning or polishing agents. Make sure no liquid gets in the

device.

CAUTION:

Clean the equipment with only a little moisture.

Note

: 

Do not open the equipment for cleaning. No components

inside the device require cleaning by the user.

Using unsuitable cleaning agents or methods can damage the property

when surface becomes dull and brittle (e.g. alcohol-containing agents).

3.

Start up the system.

26

 | Drystar Kiosk Operator Manual |  Introduction

0401B EN 20211008 1002

Содержание Drystar Kiosk 5370/100





































































































Отзывы:

Нет отзывов