AGFA Drystar 5302, Техническая документация инструкция

Страница: 52 / 459

Controls, Connections and Set Up Procedures
DD+DIS150.05E
Printed copies of this document are not controlled.
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Chapter 1 / 18 Drystar 5302 Edition 1, Revision 0
To configure logical SCP printers can
be necessary, in case for example
printing is initiated at a PACS system,
which has several modalities as
input.
Example:
The PACS system collects CR and
DSA images.
•
CR images shall be printed with
taste LUT Kanamori
•
DSA images shall be printed with
linear taste LUT.
Problem:
The workstation at the PACS system
has one AE title. The Drystar 5302
does not recognize, for which type of
modality (CR or CT) the user wants
to print.
Solution:
•
Create one logical printer
'Drystar5302_CT' and one
'Drystar5302_DSA'.
•
Create two different host profiles
for the two logical printers, one
with Kanamori LUT, the other with
linear taste LUT.
•
In the workstation setup both
printers: The user has to select
the proper logical printer.
Figure 12
The number of logical SCP printers is not limited. As each configured SCP
server consumes resources of the printer, use as little SCP servers as
possible. Rule of thumb: Define max. 4 logical printers.
6.3 Printing of diagnostic and / or test images
(1) Print a few diagnostic images from the connected modalities.
(2) Compare them at the lightbox with the image on the monitor.
Agfa Company Confidential (Typ 5366/100) 2005-09-09