AGFA Drystar 5300, Справочное руководство

Страница: 92 / 210

92
2920B EN 20031206
Printing test images
Test images are useful for checking the print quality. The Drystar 5300 offers
a number of built-in test images stored on the internal CF-card.
1
Perform steps 1 to 2 of the ‘Accessing the print images menu’ procedure on
page 91 to select the ‘Print image’ screen.
2
On the ‘Print image’ menu, press the Confirm key to select ‘Test image’.
The ‘Select test image’ screen is displayed:
3
Press the up/down arrow keys to select the desired test image, followed by
the Confirm key.
The ‘Number of copies’ screen is displayed:
4
Press the arrow keys to increment/decrement the number. For more info,
refer to
‘Data entry’ on page 27 .
5
Press the Confirm key to confirm the number of copies.
The ‘Queuing file’ screen will be shown to indicate to the operator that the printing
action is accepted and in process:
After about five seconds this screen will disappear.
"
If the printer memory is full, the following message will appear:
Wait until one or more print jobs have finished before launching a new one.
PI Select test image
1 SMPTE_KAN V2
2 SMPTE_LIN V2
3 TPA V1.tif
4 SMPTE_3.00 V2
Number of copies
0 1
PI
Queuing file
< filename>
Please wait
PI
Unable to accept
new job while
printing
Please wait
PI