AGFA CR 10-X Скачать руководство пользователя страница 221

Страница: 221 / 288

DD+DIS155.11E

Repair and Service

Software Releases and Patches

DOCUMENT CONTROL NOTE:

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.

Edition 1, Revision 3

CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.8 / Page 7 of 13

04-2013

Type 5151 / 100 / 110 / 200 / 210

Agfa Company Confidential

Software Release ARC_1202

Release Date

07/2012

Digitizer SNs

Software ARC_1202 is installed in digitizers with
SN

≥

1215 and additionally in 1206, 1211 and SN 1212

ex factory.

Availability



Agfa HealthCare Library*



USB flash drive, delivered with the digitizer

Prerequisites

The NX workstation connected to the digitizer requires
software

≥

NX 2.0.8700 / 3.0.8700.

For additional system component compatibility
information refer to following documents:



Solution Structure Data Document, Document ID*
30781759 (

Intranet Link

Extranet Link

)



CR/DR Interoperability Matrix, Document ID*
31333326 (

Intranet Link

Extranet Link

)

Reference Document

DD+DIS184.12E, Service Bulletin No. 03,
Software Update ARC_1202 available to solve Galvo
Error 10852 (

Intranet Link

Extranet Link

)

* On the Agfa HealthCare Library only the latest software release can be downloaded.

3.1

Solved Software Issues in Software ARC_1202

In software ARC_1202 the Galvo adjustment time is adapted: This prevents error
10852 (Adjust Galvo failed) which may appear at a digitizer fully warmed up and
operated at higher ambient air temperature.

Содержание CR 10-X

































































































































































































































































































Результаты поиска

Содержание CR 10-X

Отзывы:

AGFA CR 10-X, Руководство по обслуживанию, Страница: 221 / 288

Результаты поиска

Содержание CR 10-X

Отзывы: