AGFA 6012/001 Скачать руководство пользователя страница 47

Страница: 47 / 124

Radiation Protection

X-ray radiation can cause serious damage to the health, therefore observe

great care and ensure that protection against X-ray exposure is always applied.
Some of the effects of X-ray radiation are cumulative and may extend over a

period of time. Therefore the X-ray operator should avoid exposure by X-ray

radiation at all times.
Objects in the path of the X-ray beam may produce scattered radiation. The

intensity depends on the energy and intensity of the X-ray exposure and the

material of the object. Protective measures have to be taken to prevent

exposure through scattered radiation.
Protective measures include:

• structural configuration of the X-ray room (e.g. lead shielded rooms)
• radiation protection for the operators (e.g. personal radiation dosimeters,

lead aprons, keep maximum distance from X-ray source, regular training,

etc.)

• protection of patients against unnecessary radiation (e.g. limitation of X-

ray field by collimation, lead shielding, lead aprons, etc.)

Monitoring of Personnel

The monitoring checks the amount of X-ray radiation the personnel has been

exposed to. It determines safety of the operators and it helps checking if safety

measures of the X-ray environment are adequate. Inadequate or improper

protection can lead to serious damage to the health.
To measure radiation, personal radiation dosimeters are typically used. They

are worn on the body at all times during working in an environment where X-

ray radiation is applied. They provide an indication for the amount of

radiation the operator was exposed to.

DR 100e (Digital Radiography) | Introduction |

0365B EN 20181015 0853

Содержание 6012/001





























































































































Результаты поиска

Содержание 6012/001

Отзывы:

Бренды по названию

Популярные бренды

AGFA 6012/001, Руководство пользователя

Результаты поиска

Содержание 6012/001

Отзывы:

Бренды по названию

Популярные бренды