AGFA 6012/001 Скачать руководство пользователя страница 11

Страница: 11 / 124

Disclaimer

Agfa assumes no liability for use of this document if any unauthorized

changes to the content or format have been made.
Every care has been taken to ensure the accuracy of the information in this

document. However, Agfa assumes no responsibility or liability for errors,

inaccuracies or omissions that may appear in this document. To improve

reliability, function or design Agfa reserves the right to change the product

without further notice. This manual is provided without warranty of any kind,

implied or expressed, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose.

Note

In the United States, Federal law restricts this device to sale

by or on the order of a physician.

DR 100e (Digital Radiography) | Introduction to this Manual |

0365B EN 20181015 0853

Содержание 6012/001





























































































































Результаты поиска

Содержание 6012/001

Отзывы:

Бренды по названию

Популярные бренды

AGFA 6012/001, Руководство пользователя

Результаты поиска

Содержание 6012/001

Отзывы:

Бренды по названию

Популярные бренды