AGFA 5410/050 Скачать руководство пользователя страница 42

Страница: 42 / 75

Safety Directions

WARNING:

Only qualified and authorized personnel shall operate this

system. In this context ‘qualified’ means those persons legally

permitted to operate this equipment in the jurisdiction in which

the equipment is being used, and ‘authorized’ means those

persons authorized by the authority controlling the use of the

equipment. Full use must be made of all radiation protection

features, devices, systems, procedures and accessories.

WARNING:

Improper changes, additions, maintenance or repair of the

equipment or the software can lead to personal injury, electrical

shock and damage to the equipment. Safety is only guaranteed

when changes, additions, maintenance or repairs are carried out

by an Agfa certified field service engineer. A non certified

engineer performing a modification or service intervention on a

medical device, acts on his own responsibility and makes the

warranty void.

WARNING:

System unavailability due to hardware or software failure. If the

product is used in critical clinical workflows, a backup system

has to be foreseen.

WARNING:

Do not connect the equipment with anything other than

specified. Doing so may result in fire or electric shock.

WARNING:

Do not connect additional extensions cords or multiple power

socket outlets to the system.

WARNING:

According to MDD/93/42/EEC, this unit is equipped with EMC

filters. The lack of proper grounding may produce electrical

shock.

WARNING:

To avoid risk of electric shock, do not remove any covers.

Changes, additions, maintenance or repairs must be carried out

by an Agfa certified field service engineer.

| DX-D 100 | Introduction

0187K EN 20191024 1609

Содержание 5410/050












































































Результаты поиска

Содержание 5410/050

Отзывы:

Бренды по названию

Популярные бренды

AGFA 5410/050, Руководство пользователя

Результаты поиска

Содержание 5410/050

Отзывы:

Бренды по названию

Популярные бренды