AGFA 5366/500 Скачать руководство пользователя страница 30

Страница: 30 / 148

Transport after installation

WARNING:

Before moving the printer, always switch off the machine.

WARNING:

The printer must only be transported with all covers closed.

WARNING:

Do not lift the printer by the output tray.

WARNING:

When transporting the printer, the stability and the structure of

the tabletop have to be taken into account. The printer should

not be placed on a soft surface, since this might prevent

appropriate ventilation and cause overheating. Make sure the

printer is placed on a stable, hard surface table.

WARNING:

The appliance may not be transported continuously from one

location to the other.

WARNING:

The printer should be transported by 3 persons or if not possible

with 2. Refer to the Installation manual for more information.

| DRY 1.4, DRY 2.4 | Introduction

3631B EN 20210601 1655

Содержание 5366/500





















































































































































Результаты поиска

Содержание 5366/500

Отзывы:

AGFA 5366/500, Руководство пользователя, Страница: 30 / 148

Результаты поиска

Содержание 5366/500

Отзывы: