AGCO Massey Ferguson 9195, Руководство по обслуживанию

Страница: 36 / 41

4283440M1 02-15
General Information
GENERAL MAINTENANCE INFORMATION
Bolt Torque Values
All bolts used on this machine are Grade 5 plated bolts
unless specified as a higher grade. Always replace bolts
with Grade 5 hardware except where higher grades are
specified. All Grade 5 bolts have three radial marks on the
bolt head.
Tighten all hardware according to the following charts
unless specified differently in the manual. Do not over
tighten bolts as this can cause a bolt to fail during
operation.
Standard Bolt Torque Chart
Metric Bolt Torque Chart
Bolt S ize Grade 2 Grade 5 Grade 8
Nm Lbf ft Nm Lbf ft Nm Lbf ft
5/16-1 8 15 11 24 17 33 25
3 / 8 -16 27 20 42 3 1 59 44
7/16-14 4 3 3 2 67 49 95 70
1/2-1 3 66 49 105 76 145 105
9/16-12 95 70 150 110 210 155
5/ 8 -11 1 3 0 97 205 150 2 8 5 210
3 /4-10 2 3 5 170 3 60 265 510 3 75
7/ 8 -9 225 165 5 8 5 4 3 0 8 20 605
1- 8 3 40 250 8 75 645 12 3 0 910
S tandard Bolt Identification
Gr a de 2
No M a rk s
Gr a de 5
3 M a rk s
Gr a de 8
6 M a rk s
Bolt S ize Cla ss 5. 8 Cla ss 8 . 8 Cla ss 10.9
Nm Lbf ft Nm Lbf ft Nm Lbf ft
M 5 x 0. 8 4 3 6 5 9 7
M 6 x 1 7 5 11 8 15 11
M 8 x 1.25 17 12 26 19 3 6 27
M 10 x 1.5 33 24 52 3 9 72 5 3
M 12 x 1.75 5 8 42 91 67 125 9 3
M 14 x 2 92 6 8 145 105 200 150
M 16 x 2 145 105 225 165 3 15 2 3 0
M 1 8 x 2.5 195 145 3 10 2 3 0 405 3 00
M 20 x 2.5 2 8 0 205 440 3 25 610 450
M 24 x 3 4 8 0 3 55 760 560 1050 7 8 0
Identify metric b olt s b y the cl ass n u m b er s t a mped on the b olt
he a d or n u t. Higher n u m b er s indic a te higher s trength.