AGCO Massey Ferguson 9195, Руководство по обслуживанию

Страница: 26 / 41

4283440M1 02-5
General Information
COMPONENT ACCESS
FIG. 4: To open a drive shield (1), lift all the way up on
the handle (2) and push the drive shield forward.
To close a drive shield, pull rearward on the handle and
lower all the way down. Make sure the drive shield’s lower
lip is behind the support channel.
FIG. 5: To open a cutterbed hood (1), lift the hood all the
way up. Make sure the hood support (2) is engaged into
the notch (3) in the center hood.
To close a cutterbed hood, lift the cutterbed hood slightly.
Lift the hood support out of the notch in the center hood
and lower the cutterbed hood. Make sure the cutterbed
hood is all the way down and the curtains are held closed
by the magnets.
PROPER DISPOSAL OF WASTE
Improper disposal of waste can pollute the environment
and ecology. A few examples of potentially harmful waste
from AGCO equipment include, but not limited to, items
such as oil, fuel, coolant, brake fluid, filters, battery
chemicals, tires, etc.
Use leak proof containers when draining fluids. Do not
use food or beverage containers to collect waste fluids, as
food or beverage container(s) may mislead someone into
drinking from them.
Do not pour or spill waste onto the ground, down a drain,
or into any water source.
Air conditioning refrigerants escaping into the air can
damage the Earth's atmosphere. Government regulations
may require a certified air conditioning service center to
recover and recycle used air conditioning refrigerants.
Inquire with local environmental or recycling center on the
proper way to recycle or dispose waste.
FIG. 4
1
2
R0629617
FIG. 5
2
3
1
R0629641