AGCO Massey Ferguson 9195, Руководство по обслуживанию

Страница: 24 / 41

4283440M1 02-3
General Information
DESCRIPTION
FIG. 3: A rotary header is used to cut the crop, condition
the crop, and put the crop into a swath or windrow. A
rotary header permits increased windrowing speed and
crop capacity.
The header height is adjusted with the header angle
cylinder connected to the center link (1). The header skid
shoes (2), or optional gauge rollers also help control
header height and flotation.
As the machine passes over the crop, the curtains are
moved upward and the cutterbed (3) contacts the crop.
The knives on the rotating discs (4) cut and feed the crop
directly into the hay conditioner.
The helper roll (5) reduces turbulence for smooth crop
flow into the hay conditioner. The augers prevent crop
from hesitating on the rear wall and also help feed the
crop into the hay conditioner rolls.
The hay conditioner rolls (6) condition the crop for fast
drying. The hay conditioner rolls also increase the speed
of the crop.
NOTE: A double conditioner is shown. A single
conditioner will only have the front set of hay
conditioner rolls.
The swathboard (7) or forming shields (8) determine the
crop position on the ground for drying and pickup
operations.
See the Operation section of this manual for more
information on the following items.
Header Skid Shoes
The position of the header skid shoes can be adjusted up
or down. This adjustment is made manually. See Skid
Shoes in the Adjustments section for more information.
Optional gauge rollers can also be installed instead of the
skid shoes to help the header move across soft ground.
See Gauge Rollers in the Accessories and Options
section for more information.
FIG. 3
3
5
7
8
1
4
6
2
D-16583