AGCO Massey Ferguson 1547, Руководство по обслуживанию

Страница: 4 / 51

4283094M2 01-1
General
GENERAL
INTRODUCTION
This service manual has been prepared with the latest
service information available at the time of publication.
Read the service manual carefully before doing any
service on the machine. This manual is one of the most
important tools available to the service technician.
Right-hand and left-hand, as used in this manual, is
determined by facing the direction the machine will travel
when in use.
The photos, illustrations, and data used in this manual
were current at the time of printing, but due to possible
production changes, your machine can vary slightly. The
Manufacturer reserves the right to redesign and change
the machine as necessary without notification.
m
WARNING: Some pictures in this manual
show the machine with shields or guards
removed to allow for a better view of the
subject of the picture. All shields and
guards must be in position before operating
the machine.
TO THE DEALERS
This manual was developed to provide the best possible
information, technical support and service to the
customer. Review the Table of Contents and basic layout
to become familiar with locations of pertinent information
such as maintenance table, specifications and etc.
REPLACEMENT PARTS
To receive efficient service, always remember to give the
dealer the following information:
• Correct part description or part number.
• Model number of your machine.
• Serial number of your machine.
UNITS OF MEASUREMENT
Measurements are given in metric units followed by the
equivalent in US units. Hardware sizes are given in
millimeters for metric hardware and inches for U.S.
hardware.
TABLE OF CONTENTS
A Table of Contents is in the front of this manual. The
Table of Contents shows the divisions. The individual
divisions also have a Table of Contents.
PAGE NUMBERS
All page numbers are made of two numbers separated by
a dash, such as 01-25. The number before the dash is the
division number. The number following the dash is the
page number in that division. Page numbers will be at the
lower right or left of each page.
Find manuals at https://best-manuals.com