manualshive.com logo in svg

AGCO LELY ATTIS PT 130, Руководство оператора

Поделиться
Скачать
AGCO LELY ATTIS PT 130 Скачать руководство пользователя страница 56

Procedure

1.

NOTE: 

The bale end-tipper sets the bale on its end after release. This will decrease the risk of

damage to the bale film and stops the bale from sudden movements.

Install the optional bale end-tipper to the machine if operated on slopes frequently.

2.

When the machine is in operation without the bale end-tipper always release bales in a perpendicular

direction to the slope.

3.

If the work area is muddy, peaty or wet soil install the foot plate for the bale end-tipper.

3.5.4  Shut down procedure on the field

Procedure

1.

Park the machine on a level surface.

2.

Make sure that there is not a bale on the machine.

3.

Let all parts that move stop before you go near the machine.

4.

Push the button 

 on the E-Link Basic control to set the machine to OFF

5.

Stop the tractor engine and remove the key.

6.

The machine is safe to adjust, maintain or set to the working/transport position at this time.

GUID-F03651F3-167E-4BFD-A20B-90331463FE34 [V1]

3. Operation

56

Bale Wrapper

4820.LE.EN01

Содержание LELY ATTIS PT 130



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды