manualshive.com logo in svg

AGCO LELY ATTIS PT 130, Руководство оператора

Поделиться
Скачать
AGCO LELY ATTIS PT 130 Скачать руководство пользователя страница 55

NOTE: 

The wrapping table turns to the loading position automatically after it stops.

3.5.1.2  Start wrapping manual mode

You cannot adjust the machine parameters in automatic mode. Set the E-Link Basic control to manual

mode to adjust the parameters.

Procedure

1.

Change to manual mode

a) Push the button 

 to set the machine into manual mode.

NOTE: 

Do a check on the E-Link Display to make sure that the machine is in manual mode. 

b) Set the quantity of turns to wrap.
c) If the necessary quantity of turns is not correct do the "Calculate the number of turns" procedure.

2.

NOTE: 

After the necessary quantity of turns the machine automatically stops

NOTE: 

After the machine automatically stops the machine table moves to the release position.

Start wrapping Push the button 

 to start the wrapping operation.

3.

Push the button 

 to stop the wrapping operation

4.

Push the button 

 to turn the wrapping table in the opposite direction of operation.

5.

Push the button 

 to open the film cutter.

6.

Push the button 

 to close the film cutter.

7.

Push the button 

 to lift the wrapping table.

8.

Lower the wrapping table Push the button 

 to lower the wrapping table.

3.5.2  Before you start to wrap

Procedure

1.

Pull the film from the film roll and attach it to the eye bracket on the film cutter.

2.

Make sure that the adjustments that follow are correct before wrapping with the machine.

1.

Calculate the number of wraps

2.

Adjust the speed that the discharge table lowers.

3.

Adjust the film holder size.

4.

Adjust the machine for bale sizes.

5.

Adjust the film stretch.

6.

Programme settings

3.5.3  Drive on slopes

IMPORTANT: 

Risk of equipment damage.

Do not operate the machine on a slope of more than 8°.

GUID-57D23296-5642-4B58-86C3-1CC8493963A8 [V1]

GUID-8D00DB9A-9829-4F97-B777-28D3A0DA6AF9 [V1]

GUID-5D9C2473-B5FB-4FD2-8389-9735A8485A01 [V1]

3. Operation

Bale Wrapper 

55

4820.LE.EN01

Содержание LELY ATTIS PT 130



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды