AGCO GSI 40 Series, Руководство по монтажу, Страница: 25 / 164

Chapter 3: Hardware requirements
Bolt Identification
Use the following information to identify the bolts and where each must be used during installation.
Bolt S-7482
An S–7482 is a 5/16 x 3/4 in. JS bolt that is pre-assembled with a sealing washer.
Bolt (S-7482) is used in the following locations:
• Use in accessories.
• Color of bucket lid is dark blue.
A
0.950 in. (2.67 cm)
C Grade 8
B
0.750 in. (1.90 cm)
D Grade 8..2
Bolt S-10260
An S–10260 is a 5/16 x 1 in. JS bolt that is pre-assembled with a sealing washer.
Bolt (S-10260) is used in the following locations:
• Use to connect horizontal, vertical and overlap seams on 15
gauge to 20 gauge sidewall connections.
• Use to connect roof panels together where they overlap.
• Use when connecting eave angle to sidewall sheet.
• The color of the bucket lid is lime green.
A
1.300 in. (3.30 cm )
C Grade 8
B
1.000 in. (2.54 cm)
D Grade 8.2
Bolt S-7483
An S–7483 is a 5/16 x 1-1/4 in. JS bolt pre-assembled with a sealing washer.
Bolt (S-7483) is used in the following locations:
• Use in base angle to sidewall connection.
• Use in flashing to sidewall connection.
• Use in Accessories.
• The color of the bucket lid is black.
A
1.437 in. (3.64 cm )
C Grade 8
B
1.250 in (3.17 cm)
D Grade 8.2
Pneg-4460A 60 Ft Diameter 40-Series Bins 25