AGA DC3, Руководство по установке

Страница: 3 / 24

HEALTH AND SAFETY
Consumer Protection
As responsible manufacturers we take care to make sure that our products are designed and
constructed to meet the required safety standards when properly installed and used.
PLEASE READ THE ACCOMPANYING WARRANTY.
Any alteration that is not approved by AGA could invalidate the approval of the appliance,
operation of the warranty and could also affect your statutory rights.
In the interests of safety and effective use, please read the following before using your new AGA
appliance.
Important
This appliance may contain some of the materials that are indicated below. It is the
Users/Installers responsibility to ensure that the necessary personal protective clothing is worn
when handling, where applicable, the pertinent parts that contain any of the listed materials that
could be interpreted as being injurious to health and safety, see below for information.
Fire Cement - when handling use disposable gloves.
Glues and Sealants - exercise caution - if these are still in liquid form use face mask and
disposable gloves.
Glass Yarn, Mineral Wool, Insulation Pads - may be harmful if inhaled, may be irritating to
skin, eyes, nose and throat. When handling avoid inhaling or contact with skin or eyes. Use
disposable gloves, face masks and eye protection. After handling wash hands and other
exposed parts. When disposing of the product, reduce dust with water spray, ensure that parts
are securely wrapped.
INSTALLATION REQUIREMENTS
THIS APPLIANCE MUST ONLY BE INSTALLED BY COMPETENT ENGINEERS WHO HAVE
BEEN SPECIFICALLY FACTORY TRAINED ON THE PRODUCT AND WHO HAVE THE
APPROPRIATE EQUIPMENT.
With specific exceptions, the installing of any type of AGA cooker is subject to the respective
directions contained in the current issue of the Building Regulations. In addition, planning
permission may need to be obtained, which should be applied for separately.
The installation of the appliance must be in accordance with the relevant requirements of the IEE
Wiring Regulations and Building Regulations. It should be in accordance also with any
requirements of the local authority.
In your own interest, and that of safety to comply with the law. all appliances should be installed
by an authorised AGA engineer or distributor, in accordance with the relevant regulations.
3
DELIVERY REQUIREMENTS
The AGA DC3 arrives on 1 pallet
The AGA DC5 (Hotcupboard Option) arrives on 2 pallets.
There must be access to the kitchen to manipulate a foot print of 1005mm x 740mm. A wooden
template (skate with castor wheels) of dimensions 1005mm x 740mm could be used to check if
the AGA Dual Control fully built appliance is able to fit through the property grounds and doors
into its installation position in the kitchen. It must also be considered that the height of the
appliance is 960mm off pallet and 1100mm on the pallet, so high level obstacles/restrictions must
not be overlooked.
If this skate/template can be manipulated through the property grounds and doors
into position, then the AGA can be installed as intended with no re-work.