TROUBLESHOOTING YOUR REFRIGERATED DRAWERS
Problem
Possible Cause
Remedy
Unit not cold enough.
Control set too warm.
•
Airflow to front grille blocked.
•
Excessive usage or prolonged drawer
•
openings.
Drawer gasket not sealing properly.
•
Adjust temperature colder. (See “Set
•
the desired temperature” on page 6).
Allow 24 hours for temperature to
stabilize.
Airflow must not be obstructed to
•
front grille. See “clearances” on page
3.
Allow temperature to stabilize for at
•
least 24 hours.
Adjust or replace drawer gasket.
•
Unit too cold.
Control set too cold.
•
Adjust temperature warmer. (See
•
page 6, “set the desired tempera
-
ture”). Allow 24 hours for tempera
-
ture to stabilize.
No interior light in drawer compartments.
Failed LED interior light assembly.
•
Contact a qualified AGA MARVEL
•
service technician.
Light will not go out when drawer is
closed.
Drawer not activating light switch.
•
Unit not level, level unit, (See page 3,
•
“leveling legs”)
Noise or Vibration.
Unit not level.
•
Level unit, see “Leveling Legs” on
•
page 3.
Unit will not run.
Unit turned off.
•
Power cord not plugged in.
•
No power at outlet.
•
Turn unit on. See “Start your Appli
-
•
ance” on page 6.
Plug in power cord.
•
Check house circuit.
•
Before You Call for Service
If the unit appears to be malfunctioning, read through this
manual first. If the problem persists, check the troubleshooting
guide below. Locate the problem in the guide and refer to the
cause and its remedy before calling for service. The problem may
be something very simple that can be solved without a service
call. Some remedies listed in the Troubleshooting Guide are very
complex. Consulting or contracting a qualified service technician
may be necessary.
Electrocution Hazard -
Never attempt to repair or perform main
-
tenance on the unit until the main electrical power has been
disconnected.
12