manualshive.com logo in svg

Ag Leader GeoSteer CDMA, Руководство оператора, Страница: 34 / 102

Поделиться
Скачать
Ag Leader GeoSteer CDMA Скачать руководство пользователя страница 34

28

Press 

 to return to Manage Vehicles screen.

÷

NOTE!: After importing a vehicle it is required to complete Compass and Tilt Zero calibrations by pressing Auto 
Calibrate button in Vehicle Menu.

For information on Auto Calibrate, see 

“AUTO CALIBRATE” on page 18

.

Steering Adjust

After vehicle has been calibrated, it should perform 
adequately for most normal field operations. However in 
some situations, it may be necessary to adjust steering 
performance to take into account field conditions, implement 
selection, traveling speed, etc. Steering Adjust screen enables 
user to adjust vehicle steering performance to match these 
changing conditions. You can change response of selected 
item by using slider bar.

To access Steering Adjust screens, press Steering Adjust 
button on AutoSteer Setup Vehicle screen.

Steering Adjust screen has following items that can be adjusted:

Steering Freeplay (MDU-G4 Only)

—Adjust for freeplay in the vehicle steering. the value represents steering wheel 

movement without tire movement.

Steering Response

—Adjusts for oscillations of vehicle when it is on desired path.

Line Acquisition

—Adjusts how aggressively vehicle steers onto desired steering path (A/B line). The goal is to tune 

system to take shortest route without excessively sharp or sudden movements of vehicle.

Cross-Track Error

—Adjusts how aggressively vehicle reacts to changes in cross-track error.

Heading aggressiveness

—Adjusts how aggressively vehicle reacts to changes in vehicles heading.

Reverse Response

—Adjusts steering aggressiveness when vehicle is traveling in reverse.

Motor Response

—Adjusts how aggressively the MDU motor turns the steering wheel.

Each item on Steering Adjust screen allows user to alter AutoSteering performance by allowing minor adjustments to 
control system. Item selected from list on right can be changed by moving slide bar using:

Moves bar towards turtle to slow response rate of steering system and makes slower smoother turns. If this 
value is moved too far to left, vehicle will get into a slow weaving pattern as it travels across field.

Moves bar towards rabbit to increase response rate of steering system. This causes system to react faster, 
however if value is moved too far to right, vehicle will get into a rapid oscillating pattern as it travels across field.

 

Press to make adjustments.

Move to increase/decrease response.

Directly select response rate to be adjusted.

Содержание GeoSteer CDMA







































































































Отзывы:

Нет отзывов