AG Budget Poolsolar, Руководство по установке

Страница: 3 / 18

2
SITE LOCATION
The Poolsolar solar collectors should be positioned facing the sun as much as
possible for a maximum efficiency, ideally 30 deg (above horizontal) facing South.
FILTRATION - MAXIMUM WORKING PRESSURE SHOULD NOT BE ABOVE 1.5 BAR (22 PSI)
A solar heat retention cover must be applied to swimming pool overnight and when the pool is
not in use to prevent heat loss.
If installing Poolsolar on a ground surface i.e. for small above ground or splasher type pools please be
aware that Poolsolar is not designed for heavy foot traffic.
Make sure that all pipework to and from the solar collector can be drained for the winter period.
We would recommend the use of a time clock to automatically turn off the filtration system at night or by-
pass the solar system. Alternatively, an automatic control system can be installed see page 11.
Please take sufficient safety precautions before working on a roof.
Prior to commencing installation we recommend that you have the following tools and accessories
available:-
Tools:- Drill / Extruder Gun (for adhesive tubes) / Mini Wallpaper Roller / Screw Drivers / Hacksaw /
Knife
Accessories:-
ABS/PVC Glue / 1.5" Pool Plumbing (not domestic waste pipe) / PTFE Tape
Manual or Automatic 3-way Valve
Vacuum Breaker- Air release valve (see page 9, step 12)
Roof Fixing Paste
White Spirit
2000mm x 60mm x 40mm Rigid Plastic Angle (available from your dealer) for support on pitched roof
installations see page 2.
TOOLS AND PLUMBING REQUIREMENTS
90 deg. ELBOW
P/T
SOCKET P/T SOCKET
UNION
P/P SOCKET
UNION
GLUE P.T.F.E TAPE 3m x 1.5” ABS PIPE Y- SECTION
Automatic 3-Way Valve Manual 3-Way Valve
VACUUM BREAKER
(Model may vary)