AFRISO TankControl 10 Скачать руководство пользователя страница 4

Страница: 4 / 44

This instruction manual

TankControl 10

This instruction manual

This instruction manual is part of the product.



Read this manual before using the product.



Keep this manual during the entire service life of the product
and always have it readily available for reference.



Always hand this manual over to future owners or users of the
product.

1.1

Precautions

WARNING

WORD

Type and source of the hazard are shown here.



Precautions to take in order to avoid the hazard are shown here.

There are three different levels of warnings:

Warning word

Meaning

DANGER

Immediately imminent danger!
Failure to observe the information will result in
death or severe injuries.

WARNING

Possibly imminent danger!
Failure to observe the information may result in
death or severe injuries.

CAUTION

Dangerous situation!
Failure to observe the information may result in
minor or severe injuries as well as damage to
property.

Содержание TankControl 10













































Результаты поиска

Содержание TankControl 10

Отзывы:

Бренды по названию

Популярные бренды

AFRISO TankControl 10, Руководство по эксплуатации

Результаты поиска

Содержание TankControl 10

Отзывы:

Бренды по названию

Популярные бренды