AFRISO TankControl 10, Руководство по эксплуатации

Страница: 25 / 44

Mounting
TankControl 10 25
Mounting kit
In a mounting flange with union nut, in a screw cap or in a free blind
connection:
1.
Remove the mounting flange, the cap or the blind connection
from the tank and drill a 15 mm hole.
CAUTION Damage to the tank or the system due to improper mounting

Only use existing tank connections to install the product.

Do not drill directly into the tank, but only into existing mount-
ing flanges, caps or blind connections.

Verify that no foreign matter such as drilling chips can get into
the tank during mounting.
1 Cable gland (PG 9)
2 Mounting flange
Fig. 8: Mounting to tank with mounting kit
2.
Insert the enclosed cable gland (PG 9) and fasten it with the en-
closed nut.
3. Insert the cable of the submersible probe into the cable gland
(PG 9) and fixate it at the correct length so that it is odour-tight.
6.7 Mounting the floating probe (optionally available)

Fasten the floating probe with the enclosed cable gland 1" in
such a way that it is at the height at which the alarm is to be
triggered (switching point).
The weight at the floating probe keeps the floating probe vertical in
the liquid.