NOTICE!
This instruction manual is also available on www.afriso.pl.
WARNING!
The product may only be mounted, commissioned and disposed of by qualified, specially trained
staff.
Alterations performed by unauthorized staff may cause a threat and are forbidden for safety
reasons.
APPLICATION
DESCRIPTION
APPROVALS AND CERTIFICATES
Drawing 1. Construction
3-way rotary valves are mainly used as mixing valves, where the desired temperature is achieved by mixing the hot
water from the boiler and the cold water from the system return, in appropriate proportions. 3-way valves can also
be used as switching or separating valves, when changing the flow direction between two outlets (e.g. central he-
ating and domestic hot water preparation) is required. The 3-way ARV ProClick valves can be utilized in cooling and
d.h.w. systems.
3-way rotary mixing valves ARV ProClick with inner threads are made out of brass. The connections have octagonal sha-
pe. The valves have knobs for manual operation and rotation angle limiters. The scale on top of the knob is printed with
“from 0 to 10” on one side and on the other “from 10 to 0”, so one can mount the valve in various positions. The thicker
knob part shows the sleeve position inside the valve. The knob itself is made from a non-slip material. The durable
plastic parts under the knob are used to mount the ARM ProClick actuator on the valve. The ProClick system does not
require any tools. ARV ProClick valves require low torque.
The rotary mixing valves ARV ProClick comply with the Pressure Directive PED 2014/68/EU and according to artic-
le 4.3 (sound engineering practice) must not wear the CE mark.
DN15 ÷ DN25
DN32
DN40 ÷ DN50
3-way rotary mixing valves
ARV ProClick
Art.-No 13 381 10, 13 388 10, 13 382 10,
13 384 10, 13 385 10, 13 386 10,
13 387 10
INSTRUCTION MANUAL
953.001.0063 1
TECHNICAL DATA
Parameter / piece
Value / description
Working temperature
5-110˚C
Working pressure
max 10 bar
Differential pressure
max 1 bar
Body
brass CW617N
Sealing
EPDM
Leak rate (
Δ
p=100 kPa)
max 0,2% for DN15-DN32
max 0,5% for DN40-DN50
Rotation angle
90˚
Required torque
max 0,5 Nm for DN15-DN25, max 2 Nm for DN32,
max 3 Nm for DN40-DN50
Glycol concentration
max 50%
MOUNTING
Notice!
The flattening on the spindle of the valve and on the adapter mounted on it (
Drawing 1
) indicates the posi-
tion of the sleeve inside the valve (
Drawing 2
).
The ARV ProClick valve is delivered with mounted knob, blue ring and scale. Not to damage the plastic elements,
we suggest to disassemble the scale, knob and blue limiting ring before mounting the valve. These parts are moun-
ted on latch. When having trouble with dismounting the knob, one can gently pry it up with a flat screwdriver.
Next mount the valve in the system. When the valve is in place, set it and assemble the plastic components,
as follows:
1.
Determine the working range of the sleeve inside and the closing direction (
Drawing 2
). First determine
the hot and cold water inlets after the valve is mounted. The sleeve should rotate by 90˚ between these two
inlets. Next set the sleeve exactly in the middle between the hot and cold water inlet (
Drawing 2
). Learn also
the direction of closing (closing the hot water inlet) and opening (opening the hot water inlet) of the valve.
2.
Choose the right side of the scale. A double-sided scale is delivered with the ProClick valves. It is printed “from
0 to 10” on one side and “from 10 to 0” on the other. Apply the scale to the vale and choose the side on which
“0” will coincide with the cold water inlet and simultaneously “10” will coincide with the hot water inlet,
as shown on
Drawing 2
.
You can follow also another simple rule:
- if the valve is closed turned right (clockwise) choose the scale “from 0 to 10”,
- if the valve is closed turned left (counter-clockwise) choose the scale “from 10 to 0”.
3.
Put on and latch the blue limiting ring on the valve, which was set according to point 1. The indicator should
point directly on the middle of the sleeve inside the valve (
Drawing 3a
or
3b
), as well as the flattening on the
spindle and adapter. The indicator should find itself between the hot and cold inlets.
4.
Lock the knob on the adapter. It fits only in one position (
Drawing 4
).
5.
Put the lid with the chosen scale (
Drawing 5
) on the knob. To lock the lid first put the smaller inset in the hole
inside the knob and then press the lid down.
6.
Check if the valve works properly.
valve body DN40-50
valve body DN32
valve body DN15-DN25 with plastic part for
ProClick actuator
adapter with f attening, for
ARM ProClick actuators
adapter f xing screw
knob with a thicker part showing the valve sleeve position
double-sided scale
limiting ring with indicator
f attening on the valve spindle
AFRISO Sp. z o.o.
Szałsza ul. Kościelna 7
42-677 Czekanów
Poland
www.afriso.pl
Customer service
Tel. +48 330 33 55
Fax: +48 330 33 51
1
2
