Electric actuators ARM ProClick
Art.-No 14 323 10, 14 343 10, 14 343 11
NOTICE!
This instruction manual is also available on www.afriso.pl.
MOUNTING ON AN ARV ProClick VALVE
The
ARM ProClick
valve is factory set on 50% (position “5” on the scale). To mount the actuator pro-
perly on the valve, the valve must also be set on 50%.
WARNING!
The product may only be mounted, commissioned and disposed of by quali-
fied, specially trained staff.
Alterations performed by unauthorized staff may cause a threat and are for-
bidden for safety reasons.
The product is powered by 230 V AC voltage. This may cause severe injuries
or death.
Do not let the product go into contact with water.
Before mounting the product please read the manual of the mixing valve.
APPLICATION
SCOPE OF DELIVERY
INSTRUCTION MANUAL
Electric actuators
ARM ProClick
are designed to operate on 3-/4-way rotary mixing valves, which requ-
ire a maximum turning torque of 6 Nm. They have a turning angle of 90˚. The
ARM ProClick
actuator
should be connected to a 3-point controller with a 230 V AC supply voltage. One can operate the actu-
ator also manually using the knob. The
ARM ProClick
actuators are mainly used to mix two streams via
the mixing valve, to obtain a set temperature on the outlet connection of the valve.
One can mount the actuator in 4 positions on the valve. The blue ring with indicator must point
upwards. If it does not, pull off the knob and blue ring. Then mount it back with the indicator pointing
upwards. The blue ring has a special hole inside to lift it with a flat screwdriver.
1. Take off the knob and blue limiting ring from the
ARV ProClick
valve (
Drawing 1
). To do this, just
pull the parts along the spindle axis. The knob construction allows to lift it with a flat screwdriver.
There are special holes on two sides of the knob.
2. Set the valve on 50%, so that the sleeve inside the 3-way valve will be right in the middle between
the hot and cold inlets (
Drawing 2
or
Drawing 3
,
Drawing 5
) or just in the middle of the outlet
connections in a 4-way valve (
Drawing 4
,
Drawing 6
).
3. Slide the actuator on the mixing valve, so that the 4 pins of the
ProClick
mechanism find themselves
in the appropriate holes on the back of the actuator and the mechanism locks on them (
Drawing 7
).
The
ProClick
mechanism requires no tools.
4. Insert the double-sided scale in the correct position according to the opening/closing direction
(“from 0 to 10” or “from 10 to 0). Follow the rules below:
- if turning the knob right (clockwise) closes the valve, choose the scale “from 0 to 10”,
- if turning the knob left (counter-clockwise) closes the valve, choose the scale “from 10 to 0”.
The blue indicator should point at “5” on the scale. If not, please return to point 2.
5. Connect the actuator to the controller according to the scheme
(
Drawing 10
). The electric cable of the actuator can be detached.
This makes mounting and electrical connections easier. To take
out the plug, one must lift the lever of the cover and slide it out
(
Drawing 11
). Next detach the plug (
Drawing 12
). The plug fits
into the socket only in one position.
Drawing 1. View on the
ARV ProClick
valve with removed knob
Drawing 7. Mounting the
ARM ProClick
actuator
Drawing 9. View on two sides of the scale
Drawing 10. Electrical scheme
Drawing 11. Detaching the cover
Drawing 12. Electrical plug
Drawing 8. Possible mounting positons
ARV ProClick
valve
4 pins of the
ProClick
mechanism
flattening on the adapter
pushbutton of the
ProClick
mechanism
ARM ProClick
actuator
ring with indicator
double-sided scale
knob
Drawing 2. 3-way, position 1 Drawing 3. 3-way, positon 2 Drawing 4. 4-way
Drawing 5. 3-way
Drawing 6. 4-way
1. Electric actuator
ARM ProClick
with a knob, double-sided scale (“from 0 to 10” and “from 10 to 0”)
and an electric cable with plug.
2. Mounting set for
ARV
valves without
ProClick
system (first generation) –
not included in Art.-No 14 343 11
.
3. Instruction manual.
953.001.0061 1
AFRISO Sp. z o.o.
Szałsza ul. Kościelna 7
42-677 Czekanów
Poland
www.afriso.pl
Customer service
Tel. +48 330 33 55
Fax: +48 330 33 51
mixed
stream
mixed
stream
mixed
stream
hot
stream
hot
stream
cold
stream
cold
stream
closing
direction
closing
direction
Connect the controller to the power supply according to the producer’s manu-
al or guidelines.
Connect the neutral wire N direct to the mains supply or to the controller,
if it gives such a possibility.
3-point
controller
actuator
wires
1
2
4
3
