AFM LX-100 Скачать руководство пользователя страница 92 | Manualshive

Страница: 92 / 98

AFM LX-100 Скачать руководство пользователя страница 92

92 Warranty Statement

Warranty Verification

If you believe that a product or component may be defective and may be covered by
warranty, obtain a Return Material Authorization number by calling our technical support
number (toll free at 1-800-835-9344, or 763-428-4846 or Fax: 763-795-8867) or e-mail:

[email protected]

. Based on the recommendation from AFM technical support,

replacement components may be shipped out via UPS Ground or similar method. If
expedited shipping is desired, customer must furnish their shipping account and
shipping fees will be charged to that account.

Customer is required to return the defective component to AFM. If, after 30 days, AFM
hasn’t received the defective component, the customer will be invoiced for the
replacement component. If the returned component is found to not be eligible for
warranty, AFM will contact the customer, and the customer will be invoiced for the
replacement component.

Warranty within 60 days of invoice

For warranty questions that take place within 60 days of the original invoice, AFM will
allow cross-shipment of a replacement component to an end-user customer or AFM
distributor. The customer will be invoiced for the replacement component 60 days after
it ships. Upon receipt of the returned component, AFM will evaluate it and issue credit
where necessary.

For components that have been misused or externally damaged, AFM will not issue
credit, and will contact the customer to determine whether or not they want the
component repaired and/or returned.

Warranty after 60 days of invoice

For warranty questions that take place more than 60 days from the original invoice,
AFM requires the end-user or AFM distributor to return the component to AFM for
repair. Upon receipt of the returned component, AFM will evaluate it and repair as
necessary.

Components that fall within our warranty policy will be repaired normally within 5
business days of receipt and returned to the customer via standard ground shipping at
AFM’s expense. If expedited shipping is required, the customer must furnish their
shipping account number and shipping fees will be charged to that account.

For components that have been misused or externally damaged, AFM will contact the
customer to determine whether they want the component repaired and/or returned.

Warranty Eligibility

The warranty provided by AFM is only to the original buyer.

«
...
90
91
92
93
94
...
»

Содержание LX-100



































































































Отзывы:

Нет отзывов