AFM LX-100, Руководство пользователя, Страница: 61 / 98

Print Reading Sensor 61
Print Reading Sensor setup
Note:

When pressing "+"or"-", the red light will turn on.

Pressing the "+" or"-" key for 3 seconds will turn on the on/off key lock function.
When red light is on, the sensor's sensitivity cannot be adjusted.

The dark/light switching can be set if you press the "+" and
"-" keys simultaneously(6s).
Factory setting: Transparent film =yellow light on
shading film = yellow light off

The printing sensor has four wires:

Brown- Connects 10-30V

Blue- Connects to OV

White- Connects to NPN type PLC infeed

Black- Connects to PNP type PLC infeed
This machine uses an NPN connection
(The white wire is connected to the PLC, and the black wire is not used.)
Cover the sensor head
with the clear area of
the film.
Press the “-” key
until the yellow light
goes out.
Press the “+” key
until the yellow light
turns on.
Press the “+” key
for 1 second and release.
Check the sensor operation
to insure that the yellow light
goes off when the printed area
of the film goes by, and that it
goes on when the clear protion
of the film goes by.
Yellow light
goes out
Yellow light ON Yellow light ON
Yellow light OFF
1407