Software Manual EN
◼
SE-24
◼
01.06.2022
◼
V1.3
39
–54
5.8.5 Jog mode
The Jog mode is a useful aid to executing slow movements for commissioning and to
determining the positions for future positionings.
Velocity
Target movement speed used for the Jog mode.
Comment: Depending on the application the value is
displayed in the following units:
translatory: [mm/s]
rotary: [°/s]
Acceleration
Target acceleration used for the Jog mode.
Comment: Depending on the application the value is
displayed in the following units:
translatory: [mm/s
2
]
rotary: [°/s
2
]
Jog+
By pressing and holding down the “Jog+” button the drive is
accelerated with the acceleration set for the Jog mode up to
the velocity in the positive direction which was also set for
the Jog mode.
When the button is released the drive is braked until stop
with the deceleration set for the quick stop.
Comment: The function is only active when controller
enable was activated. A reference run does not have to be
executed.
Jog-
By pressing and holding down the “Jog-” button the drive is
accelerated with the acceleration set for the Jog mode up to
the velocity in the negative direction which was also set for
the Jog mode.
When the button is released the drive is braked until stop
with the deceleration set for the quick stop.
Comment: The function is only active when controller
enable was activated. A reference run does not have to be
executed.
