Afag DG 16 Скачать руководство пользователя

Страница: 24 / 50

Transport, packaging and storage

24 – 50

Assembly instructions EN



DG 16



Edition 07/2020



Rev. 3.0

4.3 Transport

No liability can be assumed for damages caused by improper installation on

the part of the operating company.

The following conditions must be complied with for transport and storage:



Storage temperature: 0-50 °C



Relative air humidity: < 90%, non condensing

4.4 Packaging

The rotary grippers are packed in the most appropriate manner.

Standardized symbols for packages

Symbol

Note

Explanation

Top

The package shall be transported, handled and

stored with the arrows always pointing upwards

(top side of the package).

Fragile

Products marked with this symbol shall be

handled with care and may never be turned

upside down or tied up.

Protect

against

moisture

The packages shall be protected against

moisture and kept dry (keep covered during

storage).

Attachment

points

The hosting equipment (chain, etc.) may only be

attached to the points marked by this symbol.

Centre of

gravity

This symbol marks the centre of gravity of the

packages (pay attention to the position of the

centre of gravity).

NOTICE

Risk to the environment due to incorrect disposal of the packaging

material!

Environmental damage can be caused by incorrect disposal of the packaging

material.



Dispose of the packaging material in an environmentally sensitive way in

accordance with the local environmental regulations.

Содержание DG 16



















































Результаты поиска

Содержание DG 16

Отзывы:

Похожие инструкции для DG 16

Бренды по названию

Популярные бренды

Afag DG 16, Инструкции по сборке и эксплуатации

Результаты поиска

Содержание DG 16

Отзывы:

Похожие инструкции для DG 16

Бренды по названию

Популярные бренды