Safety instructions
10 – 56
Assembly instructions EN
CR 25 / CR 32
Edition 01/2020
Rev. 4.0
2 Safety instructions
2.1 General
This chapter provides an overview of all important safety aspects to ensure safe
and proper use of the rotary module and optimal protection of personnel.
Failure to follow the directions and safety instructions given in this instructions
manual may result in serious hazards.
2.2 Intended use
The CR 25 / CR 32 rotary modules are used for shock-free gripping/rotating of
loads in non-hazardous atmospheres under the ambient and operating
conditions defined for these modules.
The rotary modules are designed exclusively for gripping payloads that do not
pose any danger to persons, property or the environment during manipulation.
In combination with other modules the rotary modules can be used as a pick &
place Station.
In the chemical industry and in potentially explosive areas, the use of rotary
modules is not permitted without additional safety measures. In such cases,
please consult with the Afag technical department.
The intended use of the module also includes:
observance of all instructions given in this instructions manual,
compliance with the inspection and maintenance work and the
specifications in the data sheets,
using only original spare parts.
2.3 Foreseeable misuse
Any use other than or beyond the intended use described above is considered
a misuse of the rotary module.
Especially the following use is considered a misuse:
Use in potentially explosive atmospheres
