Afag 11001864, Руководство по сборке и эксплуатации, Страница: 25 / 52

Transport, packaging and storage
Assembly Instructions EN

LM 12 I LM 16

Edition 11/2020

Rev. 2.5 25–52
The stop L-bar brackets (Fig. 6, 3) enable stop screws or stop pins (Fig. 6, 4) as
well as shock absorbers to be transferred to the rear of the module (only
possible for LM 16).
Fig. 6 Stop angle LM 12 / LM 16 (example)
4.3 Transport
No liability can be assumed for damages caused by improper installation on
the part of the operating company.
The following conditions must be complied with for transport and storage:

Storage temperature: 0-50 °C

Relative air humidity: < 90%, non condensing
4.4 Packaging
The linear modules are transported in the transport packaging of AFAG
Automation AG. If no AFAG packaging used, the linear module must be packed
so that they are protected against shock and dust.
NOTICE
Risk to the environment due to incorrect disposal of packaging material!
Environmental damage can be caused by incorrect disposal of the packaging
material.

Dispose of the packaging material in an environmentally sensitive way in
accordance with the local environmental regulations.