Albert 2 User Manual
February 2018| ©AEVI International GmbH
PAGE 7/46
In addition, the device has received the cULus mark (for USA and Canada) and UL-NOM mark (for
Mexico).
The device has received the cUL symbol.
1.3
FCC Class B Declaration
FCC Part 15.19 Warning Statement
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
1.4
Safety Notes
The device may only be repaired by authorized qualified personnel. Unauthorized opening of the
device and inexpertly carried out repairs may not only seriously jeopardize the safety of the user, but
also cancel all warranty and liability agreements.
Any physical penetration causes the device to switch into the “Non-activated” mode, which takes it
out of service and requires Security Inspection and “Re-activation” by the vendor or an authorized
service provider.
1.5
Important Notes
The payment terminal conforms to the current safety standards for data processing equipment. AEVI
does not assume liability or warranty for possible damage resulting from non-compliance with these.
Important notes or wrong usage of the device:
•
Use only the power supply which was delivered with the device.
•
The power cable must be plugged into socket-outlet that is provided with a suitable earth
ground.
•
The “CASHDR” RJ12 port of the connectivity box is only for the connection with cash drawer
device.
•
If this device is taken from a cold environment into the operating room, moisture
condensation may form. The device must be absolutely dry before being put into service; an
acclimatization period of at least two hours must therefore be observed.
•
Ensure that no foreign objects (e.g. office clips) find their way into the device, as this may lead
to electric shocks or short-circuits.
