E l e c t r o n i c B r o a d c a s t E q u i p m e n t
Pag. 22
Xtreme
Sec. 6 System Update
To update your
Xtreme II
, you need the following material:
1- Pc with a free serial port
2- Software to load the new updatings for
Xtreme II
3- Updating files (updating file + file with Updating instructions).
If the above material is available, you can go on, otherwise you can contact the customer service.
Connect the serial cable between Xtreme II and PC.
By means of the RS 232 menu select the option XTREME.
At the end of these presets, you can arrange your Xtreme for the updating
From now on, follow carefully the instructions given by the updating program installed on your PC.
The non-compliance with these instructions may cause Xtreme to block. The block can be removed only at the AEV
customer service.
If you access the Update software option by mistake, by switching the machine off and on, no change is carried out.
