Audio
You can access the following submenus:
•
Inputs
•
Processing
•
Outputs
and adjust the ringing and sound volume.
Volume for ringing and sound
For adjust the
ringing
and
sound volume
, follow these steps:
1. Select AUDIO or RINGING from the “Volume” pop-up.
2. Use the remote control arrow keys to move the Volume slider control.
3. Choose the desired value, using the remote control arrow keys.
Inputs
Allows for the adjustment of each audio input to the System.
Move to the desired input and press OK, a window will appear where you can:
•
Set the gain value for the input
•
Enable/disable the input audio stream
•
Enable/disable the Echo Canceller
Recommended inputs for video or DVD:
We strongly recommend to use “VCR” inputs for signals directly coming from video-recorders or DVD, because the
echo cancellation is disabled on these inputs.
Recommended inputs for external audio Mixers:
We strongly recommend to use the “Line” input for signals directly coming from an external audio mixer, because echo
cancellation can be enabled on this input.
The icon
“load default values”
restore factory values of the audio inputs enabling all the audio inputs.
Processing
In this menu you can enable/disable the Echo Canceller functions:
•
AGC.
•
Noise Reduction.
Outputs
In this page you can configure audio flows sent to the System Audio outputs.
You can first select Audio outputs from drop down menu, and then select the audio flow you want to send to the desired
output.
To restore factory values click on “Load default values” icon.
36
