Wall/Desk Mounted Audio Panel (603 / 703 / 705)
RE-CODING/ADDING EXTRA HANDSETS
Handsets will be
displayed in order
of H1, H2, H3 & H4.
(only 1 handset per
button)
Voicemail
When a call is not answered within 40 seconds,
the visitor can leave a message. Once complete,
the handset will display the symbol.
The unit can store up to 16 voice messages.
HANDSET BATTERIES INCLUDED
(2 x AAA 600mA Rechargeable)
Portable Audio Handset
Occasionally the system may need to be re-coded once installed.
If the handset does not ring when the call button is pressed,
the system may need to be re-coded.
(
● =
FULL RE-CODE : STEP 1-5 )
(
● =
ADDING A HANDSET : STEP 3-5 )
●
Step 1)
Press and hold the
CODE BUTTON
inside the Transmitter Module for 5 seconds
until the audible tone is heard from the Intercom speaker.
●
Step 2)
Then press the
CODE BUTTON
14 times
and wait until the melody is heard or the
LED turns off. Performing this step will remove
ALL
handsets currently synced
(or partially
synced)
to the system.
●
●
Step 3)
Press and hold the
CODE BUTTON
inside the Transmitter Module for 5 seconds
until the audible tone is heard from the Intercom speaker.
●
●
Step 4)
Then press and hold the
CODE BUTTON
on the handset until the red LED at the
top begins to flash, after a few seconds you will hear a melody play to let you know it has
successfully connected.
●
●
Step 5)
Finally you should test the kit to ensure that everything is working as expected
by pressing the Call Button on the CallPoint to ensure the handset and/or wall mounted unit
receives the call and that the two way speech is functioning correctly.
( On 603 Transmitter the blue LED marked D17 should also flash. )
( Note: Doing this step will also clear ALL voicemails after reset. )
( On 603 Transmitter the blue LED marked D17 should also flash. )
( Repeat Steps 3 & 4 for each new handset. )
OK
TI : ME
Example shows the
location of the CODE
BUTTON that can be
found on the back of
the wall mounted unit.
CODE BUTTON
Can be found on
reverse side.
TRANSMITTER
CODE BUTTON
603/703 DECT
705 DECT
+24V-
+
-
101
220
R
EL
A
Y
2
R
EL
A
Y
1
12
.0
0
0
1
2
3
4
C
12V
OUT
24V
AC DC
IN
RELAY
1
RELAY
2
+
-
N/ C
| C |
N/ O
N/ O
| C |
N/ C
8.000
To listen to a voicemail, press . If there is more than 1 use and to select the message required
and press to play. Press once to Delete the message or press and hold to delete all.
OK
OK
Change Ring Tone
Press and the handset will ring with its
currently selected tone. Then you can press the
and keys to cycle through the available ring
tones. Then press to select and save the tone.
Change Ring Volume
Press and to increase or
decrease the ring volume and
then press to save.
OK
Call Another Handset
Press and the unit will display ‘
HS1
’, ‘
HS2
’, ‘
HS3
’, ‘
HS4
’
depending on how many handsets are coded in the system.
Then use the and you can select the handset you wish
to call and then press to start the call.
OK
TI : ME
OK
ON/OFF
RECEPTION
INDICATOR
BATTERY
LEVEL
VOICEMAIL
SYMBOL
PAIRING
LED
RELAY 2
RELAY 1
CODE BUTTON
OK
* ALWAYS RANGE TEST THE UNIT ON SITE BEFORE INSTALLATION *
STILL HAVING TROUBLE?
Find all of our support options such as Web
Chat, Full Manuals, Customer Helpline and
more on our website:
WWW.AESGLOBALONLINE.COM
DECT Extra Handset Guide
Adjusting Relay time
Press Relay 2 button for 3
seconds, scroll through
menu until you see ‘
ti
’.
Press
to select ‘
ti
’
and adjust your relay
times. Press
to select
your relay time. Press
to end the process. Both
relays will have the same
relay time.
OK
OK
