AES Corporation 7740 Скачать руководство пользователя страница 1

7740

Local Annunciator 

Installation and Operation Manual 

 

operate the equipment.

AES

 

Corporation 

285 Newbury Street 
Peabody, MA 01960-1315 USA 
Tel (978) 535-7310 

• 

 Fax (978) 535-7313 

www.aes-

corp

.com

Copyright 20

21 

All Rights Reserved 

AES-

IntelliNet

 is a registered trademark of AES Corporation 

P/N 40-7740 

Rev 

2

June 

10

, 20

21

;sdkpfo pijfpfpodkspfosd

Содержание 7740

Страница 1: ...equipment AES Corporation 285 Newbury Street Peabody MA 01960 1315 USA Tel 978 535 7310 Fax 978 535 7313 www aes corp com Copyright 2021 All Rights Reserved AES IntelliNet is a registered trademark of AES Corporation P N 40 7740 Rev 2 June 10 2021 sdkpfo pijfpfpodkspfosd ...

Страница 2: ...ires 21 30 Vdc 65mA max The input power must be sourced from a Listed UL 864 Fire Alarm Control Panel FACP with a compatible power output circuit or a Listed UL1481 Power Supply for fire protection The End of Line Supervision Relay must be Listed for UL 864 and input power rated for the application The FACP must be Listed for UL 864 and input zone programmed for trouble with the correct End of Lin...

Страница 3: ...x One gang space is required for each module to be installed A standard cover plate is required to cover the assembly 1 Label the legend sheet for the 7740 2 Mount the box securely into the wall 3 Connect conduit and or pull wiring as required 4 Remove the face plate from the frame notice the routing of the Silence switch cable if applicable 5 In most cases this cable need not be disconnected Use ...

Страница 4: ... Contact the AES Technical Support team if you have questions or need more information at 800 237 6387 Option 4 or support aes corp com AES Corporation 4 40 7740 Rev 2 6 10 2021 AES 7740 Supplemental Information J1 Jumper Setting A jumper on J1 pins IS NOT required for operation The 7740 is shipped from the factory with NO jumper on J1 pins See 40 7740 Installation and Operation Manual for complet...

Отзывы: