Aerotech Nmark SSaM, Руководство пользователя

Страница: 30 / 58

Installation and Configuration Nmark SSaM Hardware Manual
2.5. XY2-100 Interface (J104)
The XY2-100 Interface connector (a 25-pin, D-style connector) has outputs for galvo clock, sync, and
channel connections. The connector pinout is shown below. J104 is designed for a 1-to-1 connection to a
galvo supporting the XY2-100 interface. The use of shielded cabling is recommended.
Table 2-13: XY2-100 Interface Connector Pinout (J104)
Pin Description In/Out/Bi Pin Location
1 Clock - Output
2 Sync Signal Output
3 Channel 1 - Output
4 Channel 2 - Output
5 Channel 3 - Output
6 Status - Input
7 No Connection N/A
8 No Connection N/A
9 No Connection N/A
10 No Connection N/A
11 No Connection N/A
12 No Connection N/A
13 No Connection N/A
14 Clock + Output
15 Sync Signal Output
16 Channel 1 + Output
17 Channel 2 + Output
18 Channel 3 + Output
19 Input
20 No Connection N/A
21 No Connection N/A
22 No Connection N/A
23 No Connection N/A
24 No Connection N/A
25 No Connection N/A
NOTE : Many scanner suppliers use the "no connection" pins on the XY2-100 cable to supply power to the scanner. Please consult
the hardware manual of the scanner connected to the NMARK-SSAM to determine which pins are used to supply power and modify
the interconnect cable accordingly
Table 2-14: Mating Connector Part Numbers for the XY2-100 Interface Connector (J104)
Mating Connector Aerotech P/N Third Party P/N
25-Pin D-Connector ECK00101 FCI DB25P064TXLF
Backshell ECK00656 Amphenol 17E-1726-2
30 Chapter 2 www.aerotech.com