Aerotech Ndrive HPe 10, Руководство по оборудованию

Страница: 64 / 126

64 Chapter 2 www.aerotech.com
2.6. Auxiliary I/O Connector (J205)
The Auxiliary I/O connector (J205) provides 1 analog and 6 digital inputs, 1 analog and 4 digital outputs, and
a secondary RS-422 line driver encoder input.
Table 2-26: Auxiliary I/O Connector Pinout (J205)
Pin# Description In/Out/Bi
Connector
1 Auxiliary Sine+ Bidirectional
2 Auxiliary Sine- Bidirectional
3 High-Speed Input 12 + user interrupt Input
4 High-Speed Input 12 - user interrupt Input
5 High-Speed Input 13 + user interrupt Input
6 High-Speed Input 13 - user interrupt Input
7 Digital Output 8 Output
8 Digital Output 9 Output
9 Digital Output 10 Output
10 Auxiliary Bidirectional
11 Auxiliary Cosine- Bidirectional
12 +5 Volt (500 mA max) Output
13 Analog Input 0 + (Differential) Input
14 Analog Input 0- (Differential) Input
15 Output Common -
16 Digital Output 11 Output
17
Digital Input 8 / CCW EOT Input
(1)
Input
18
Digital Input 9 / CW EOT Input
(1)
Input
19
Auxiliary Marker- / PSO output
(2)
Bidirectional
20
Auxiliary / PSO output
(2)
Bidirectional
21 Common (+5 Volt User Supply, 500 mA max) -
22 Analog Output 0 Output
23 Analog Common -
24 Input Common -
25
Digital Input 10 / Home Input
(1)
Input
26 Digital Input 11 Input
(1) Software configured option
(2) For PSO, see
Section 2.6.2.
Table 2-27: Mating Connector Part Numbers for the Auxiliary I/O Connector
Mating Connector Aerotech P/N Third Party P/N
Connector ECK01259 Kycon K86-AA-26P
Backshell ECK01022 Amphenol 17E-1725-2
NOTE: These items are provided as a set under the Aerotech P/N: MCK-26HDD.
Ndrive HPe 10/20/30 Installation and Configuration