Aerotech BLMF Series, Руководство пользователя

Страница: 9 / 36

BLMF Hardware Manual Safety
Safety Procedures and Warnings
Read this manual in its entirety before installing, operating, or servicing this product. If you do not understand
the information contained herein, contact an Aerotech representative before proceeding. Strictly adhere to
the statements given in this section and other handling, use, and operational information given throughout
the manual to avoid injury to you and damage to the equipment.
The following statements apply wherever the Warning or Danger symbol appears within this manual. Failure
to observe these precautions could result in serious injury to those individuals performing the procedures
and/or damage to the equipment.
N O T E : Aerotech continually improves its product offerings; listed options may be superseded at any
time. All drawings and illustrations are for reference only and were complete and accurate as of this
manual’s release. Refer to www.aerotech.com for the most up-to-date information.
N O T E : This product is intended for light industrial manufacturing or laboratory use.
D A N G E R : This product contains potentially lethal voltages. To reduce the possibility of
electrical shock, bodily injury, or death the following precautions must be followed.
1. The user must restrict user access to motor coil / wires while energized. This is
accomplished by providing an enclosure around the operating components which, when
opened, removes power to the drive. The motor may also be contained in a grounded
mechanical system (positioning stage) which restricts direct access to the high voltage
motor components.
2. Do not connect or disconnect any electrical components or connecting cables while
connected to a power source.
3. Disconnect electrical power before servicing equipment.
4. All components must be properly grounded in accordance with local electrical safety
requirements.
5. Motor frame is safety grounded with a conductor equal in size to the phase conductors.
6. The drive must contain a properly-sized fuse, matched to the motor cable wire size.
7. These motors are not rated for use in explosive atmospheres. They are not to be operated
in the presence of potentially explosive mixtures of air-borne dust or combustible vapors.
8. Motors and their associated drive, cabling, etc. are sources of electromagnetic fields.
Persons with implanted medical devices need to evaluate the risks associated with these
devices before entering an area where they are in use.
9. Operator safeguarding requirements must be addressed during final integration of the
product.
D A N G E R : The motor temperature can pose a burn hazard. Do not touch the motor until it has
cooled sufficiently.
www.aerotech.com 9