Aerotech BL 10-40, Руководство по оборудованию, Страница: 12 / 68

BL Introduction
Table 1-1: Amplifier Options
BL Series Linear Amplifiers
BL10-40-x ±40 V output (80 V bus) and 10 A peak current, with cooling fan and isolation transformer.
BL10-80-x ±80 V output (160 V bus) and 10 A peak current, with cooling fan and autotransformer.
BL20-40-x ±40 V output (80 V bus) and 20 A peak current, with cooling fan and isolation transformer.
x = A for 115 VAC single phase input power (standard)
x = B for 230 VAC single phase input power
x = C for 100 VAC single phase input power
x = D for 200 VAC single phase input power
Options
-VM1 Brushless motor, electronic Tachometer, 0° commutation offset (Aerotech standard )
-VM2 Brushless motor, electronic Tachometer, 30° commutation offset
-VM3 Brush motor, analog Tachometer
-VM4 Brush motor, electronic Tachometer
-CM1 Brushless motor, 0° commutation offset (Aerotech Standard)
-CM2 Brushless motor, 30° commutation offset
-CM3 Brush motor
-AH Analog Hall
-TP Three independent current regulators (one enable/fault )
-DDP Brushless motor, differential dual phase current commands
-PK n Peak current output n % of max
(where n can equal 6, 13, 19, 27, 33, 40, 46, 54, 60, 67, 73, 81, 87, 94, 100)
-CC
n
Continuous current output before automatic shutdown
n
% of max
(where n can equal 3, 7, 10, 14, 17, 21, 24, 27, 30, 34, 37, 41, 44, 47, 50)
Figure 1-2: Functional Diagram
2 Chapter 1 www.aerotech.com