Aerotech AUTOMATION1-HyperWire, Руководство по оборудованию

Страница: 9 / 20

HyperWire Card Hardware Manual Chapter 1: HyperWire™ Card
1.1. Installation
NOTE: Do not install the HyperWire card in a PCI Express (PCIE) expansion chassis. You must install
the card in a PCIE slot, x4 or larger, on the motherboard.
DANGER : Risk of Electric Shock. Turn off the power and disconnect the power cord before you
open the PC chassis.
To Install the HyperWire™ Card
1. Power off the computer and disconnect the computer from the power supply.
2. To get access to the motherboard, remove the computer system cover.
3. Find an available PCIe slot, x4 or larger. If necessary, refer to your computer manual for information
about available slots.
Figure 1-2: Open PCIE Slot
4. Remove the cover of the available slot that you want to use.
www.aerotech.com 9