ASR1200 Rotary Stage User's Manual
Overview
1.2. Optional Features
1.2.1. Mounting Plate
ASR1200 stages can be configured to include a mounting plate that can use either M6 or 1/4-20 bolts. The bot-
tom of this mounting plate is precision machined and verified for flatness. If the mounting plate is not
selected, a custom mounting option can be attached using the (Qty-4) M6 tapped holes in the bottom of the
stage.
1.2.2. Wrenches
This option is selected when spanner wrenches for removing the collet nut are desired.
1.2.3. Electronics Controller
The ASR1200 stage is part of a complete Aerotech motion control system, which is adjusted at the factory
for optimum performance. Setup involves connecting a stage to the appropriate drives with the cables pro-
vided. Refer to your electrical documentation package for further information.
1.2.4. Ringseals
Replaceable O-Ring seals are required to perform wet cut operations using the ASR1200. These ringseals
are sized for specific tube diameters in sizes up to 5.8 mm. Consult Aerotech for supported sizes.
www.aerotech.com
Chapter 1
3
