Aerotech AMG100LP, Руководство по оборудованию

Страница: 26 / 40

Electrical Specifications and Installation AMG-LP Hardware Manual
3.3. Motor and Feedback Specifications
Table 3-5: Feedback Specifications
Hall-Effect Sensors Specifications
Supply Voltage 5 V ±5%
Supply Current 50 mA
Output Type Open Collector
Output Voltage 24 V max (pull up)
Output Current 5 mA (sinking)
Thermistor Specifications
Polarity
Logic "0" (no fault)
Logic "1" (over-temperature fault)
Cold Resistance
∼
100 Ω
Hot Resistance
∼
10 K
Note: 1K pull-up to +5V recommended.
Encoder Specifications
Supply Voltage 5 V ±5%
Supply Current 250 mA
Output Signals
Sinusoidal Type (Incremental Encoder) : 1 V
pk-pk
into 120 Ω Load (differential
signals SIN+, SIN-, COS+, COS- are .5 V
pk-pk
relative to ground.)
Digital Output (Incremental Encoder) : RS422/485 compatible
Table 3-6: AMG-LP Series Azimuth Resolution Information
AMG100LP AMG150LP AMG200LP
Lines 10000 lines/rev 10000 lines/rev 10000 lines/rev
-E1 (sine) 10000 10000 10000
-E2 200000 200000 200000
-E3 400000 400000 400000
-E4 1000000 1000000 1000000
-E5 2000000 2000000 2000000
Table 3-7: AMG-LP Series Elevation Resolution Information
AMG100LP AMG150LP AMG200LP
Lines 3600 lines/rev 3600 lines/rev 10000 lines/rev
-E1 (sine) 3600 3600 10000
-E2 72000 72000 200000
-E3 144000 144000 400000
-E4 360000 360000 1000000
-E5 720000 720000 2000000
26 Chapter 3 www.aerotech.com