Aerotech AGV3D Series, Руководство по оборудованию

Страница: 22 / 62

Table 1-5: AGV3D-20 Spot Diameter Range (µm) within Field of View per Wavelength
Nominal Field of View
Nominal Working
Distance
343 nm 355 nm 515 nm
100 mm x 100 mm 83 mm 7.0 - 7.5 7.2 - 7.8 10.3 - 11.1
200 mm x 200 mm 221 mm 11.7 - 12.7 12.1 - 13.2 17.3 - 18.9
300 mm x 300 mm 358 mm 16.2 - 17.9 16.8 - 18.5 24.3 - 26.8
400 mm x 400 mm 495 mm 20.8 - 23.0 21.5 - 23.8 31.2 - 34.6
500 mm x 500 mm 632 mm 25.3 - 28.1 26.3 - 29.2 38.1 - 42.4
600 mm x 600 mm 770 mm 29.9 - 33.3 31.0 - 34.5 45.1 - 50.2
700 mm x 700 mm 907 mm 34.5 - 38.4 35.8 - 39.9 52.1 - 58.1
800 mm x 800 mm 1045 mm 39.1 - 43.6 40.5 - 45.2 59.1 - 65.9
1000 mm x 1000 mm 1320 mm 48.2 - 53.9 50.1 - 55.9 73.1 - 81.7
532 nm 1030 nm 1064 nm
100 mm x 100 mm 83 mm 10.6 - 11.4 20.4 - 22.0 21.1 - 22.7
200 mm x 200 mm 221 mm 17.8 - 19.6 34.1 - 37.3 35.2 - 38.5
300 mm x 300 mm 358 mm 25.0 - 27.6 47.8 - 52.7 49.3 - 54.4
400 mm x 400 mm 495 mm 32.2 - 35.7 61.5 - 68.1 63.5 - 70.4
500 mm x 500 mm 632 mm 39.4 - 43.8 75.2 - 83.6 77.6 - 86.3
600 mm x 600 mm 770 mm 46.6 - 51.9 88.9 - 99.0 91.8 - 102.3
700 mm x 700 mm 907 mm 53.8 - 60.0 102.7 - 114.5 106.0 - 118.3
800 mm x 800 mm 1045 mm 61.0 - 68.1 116.5 - 130.1 120.3 - 134.3
1000 mm x 1000 mm 1320 mm 75.4 - 84.4 144.1 - 161.2 148.8 - 166.4
1550 nm 9.3 µm 10.6 µm
100 mm x 100 mm 83 mm 30.7 - 32.9 190.5 - 204.7 216.7 - 232.8
200 mm x 200 mm 221 mm 51.5 - 56.0 316.4 - 346.2 360.2 - 394.1
300 mm x 300 mm 358 mm 71.6 - 79.1 442.6 - 488.1 503.9 - 555.7
400 mm x 400 mm 495 mm 92.2 - 102.2 568.8 - 630.0 647.6 - 717.4
500 mm x 500 mm 632 mm 112.8 - 125.4 695.0 - 771.9 791.3 - 878.9
600 mm x 600 mm 770 mm 133.4 - 148.6 821.1 - 913.7 934.9 - 1040.2
700 mm x 700 mm 907 mm 154.1 - 171.8 947.2 - 1055.4 1078.3 - 1201.2
800 mm x 800 mm 1045 mm 174.7 - 195.1 1073.2 - 1196.9 1221.4 - 1361.9
1000 mm x 1000 m 1320 mm 216.2 - 241.8 1324.6 - 1479.1 1506.8 - 1682.0
NOTES:
l
Spot diameter is expressed as 1/e 2 assuming a beam quality of M 2 = 1.
l
The working distance is measured from the bottom surface of the scan head.
l
Refer to Table 1-7 to determine which field configuration option is required to achieve a specific nominal field of
view for the desired wavelength.
l
Contact Aerotech for additional data.
1.3. Basic Specifications AGV3D Hardware Manual
22 www.aerotech.com