9
11.
Install cover lock. The combination lock is factory preset to open at 0-0-0. If you want to
change the combination, push and hold the button down, then advance each number to the
desired combination. Once a new combination is chosen, insert the lock wire and release button.
DANGER: Risk of Accidental Drowning. Always leave the cover locked and in place when
the spa is not in use. Extreme caution must be exercised to prevent unauthorized access
by children. To avoid accidents, ensure that children cannot use this spa unless they are
supervised at all times.
OPERATION:
Before operating the spa, you must ensure the water level in the spa is at the water level fill line
printed on the spa wall. Never dry-run the power pack as such type of operation will void the
warranty.
CONTROL PANEL FUNCTIONS:
1.
“BUBBLE” button: Activates air jet system.
2.
“FILTER” button: Activates filter system.
3.
“HEATER” button: Activates heating and filtering system
at the same time.
4.
“TEMP” button: Sets and displays set temperature.
5.
“
▲
” button: Higher temperature.
6.
“
▼
” button: Lower temperature.
7.
LED Display: Once powered-up, the LED displays the
current water temperature automatically.
9
10
CONTROL PANEL
