background image

 

14

 
 

LIMITED WARRANTY—TERMS & CONDITIONS 

 

This warranty extends to the original purchaser only with proof of purchase. The warranty period 
commences on the original purchase date through the 90

th

 day. The warranty is not transferable 

to subsequent purchasers. This warranty is subject to the limitations and exclusions listed below. 

 

Extent of warranty – 90 Days from date of purchase. 

 

Manufacturer’s obligation is limited to repair or replacement, at manufacturer’s option, of 
the parts shown to be defective at the time of purchase. Products being returned for 
warranty must be accompanied by a sales receipt and all transportation charges are at the 
expense of the original purchaser. 

               

Limitations and Exclusions 

The warranty is a limited warranty. It covers the Aero Spa for the period stated. Filters are 
consumable items and are not covered. This warranty negates or limits all other warranties 
implied or expressed, except for those, which can not be negated or limited by law of the state in 
which the product is used. The manufacturer does not authorize or permit any party, including its 
agents, distributors or dealers to assume for it any other obligations or liability. In no event will the 
manufacturer be liable for any claim for damages arising from the use or loss of use, installation, 
or repair of the spa pool including, but not limited to freight damage, punctures, cuts in vinyl, 
water and/or sewage costs, freeze damage, or water damage to surrounding areas, rooms, 
furnishings or landscaping. Product specifications are subject to change without notice. 
 

Acts Invalidating Warranty 

 
This warranty is void if the spa has been altered, misused, abused or has been repaired by an 
unauthorized person, or is not installed according to the factory instructions. Other acts that will 
void the warranty are operating the spa without water or improper water level, use of an 
extension cord, improper chemical maintenance, burying the spa below ground level, damage 
from ice or freezing, low voltage or excess voltage. This warranty gives you specific legal rights.   

Содержание PH050006















Отзывы: