1 |
P a g e
40 Huntingwood Drive Huntingwood NSW 2148
Phone: (02) 8825 1999 Website:
AEROFLOW PERFORMANCE
DIESEL BOOST CONTROLLER
WARNING!
THIS PRODUCT REQUIRES DETAILED KNOWLEDGE OF AUTOMOTIVE SYSTEMS. WE RECOMMEND THAT THIS
INSTALLATION BE CARRIED OUT BY A QUALIFIED AUTOMOTIVE TECHNICIAN.
INTRODUCTION
Congratulations on your purchase of Aeroflow Performance diesel boost controller. Aeroflow Performance
products cannot and will not be responsible for any damage, or other conditions resulting from misapplication
of the parts described herein. However, it is our intention to provide the best possible products for our
customer, products that perform properly and satisfy your expectations. Should you have any questions?
Please call technical support at +61 2 8825 1900 and have the product part number on hand when calling.
The Aeroflow Performance diesel specific manual boost controller is a dedicated unit for diesel turbocharged
engines running variable vane turbochargers, providing accurate boost control from the turn of the knob. This
manual boost controller allows users to adjust boost control and spool rate; therefore, increasing engine
power, reduce turbo lag and create a linear boost curve. This great for all types of driving conditions from
adjusting boost for towing, or changing it if the EGT gets too high and to bring boost on earlier or hold it
longer. When the factory boost curve is erratic this can lead to engine or turbo premature failure.
It is highly recommended to have this boost controller installed by a professional tuner. This manual boost
controller is considered a tuning tool and increasing boost pressure is done so at
the user’s risk
. A boost gauge
is also recommended to be installed first before attempting this install of the manual boost controller. This will
allow you to know the factory present peak boost pressure and will establish a good base line and target boost
pressure to ensure it does not over boost which can lead to premature engine failure. It is important to
understand that every vehicle and engine is different with different limitations and tuneability.
It is advisable to ensure that not only fuelling is sufficient for the intended boost pressure but also any
supporting mods required for the increased boost pressure is carried out before installation of this boost
controller. It is recommended to check the exhaust gas temperature after making boost pressure changes to
ensure the engine’s safety.
For more information or technical enquires
Contact: Aeroflow Performance on
Phone: (02) 8825 1979 Website:
www.aeroflowperformance.com