OPERATION
3-1-45
Sweep mode
(1)
At the sweep parameters menu, press
[Sweep Mode]
. The
Sweep
Trigger
Mode
Menu
is displayed, see Fig. 3-1-39.
Fig. 3-1-39 Sweep trigger mode menu
(2)
Select the sweep mode,
[Internal Single], [Internal Cont.]
, or
[External Trigger]
.
(3) Press
[EXIT]
to return to the sweep parameters display menu.
(4) If
[External trigger]
is selected, press [UTIL], select
[Utils. Menu 1]
and from
this menu press
[External Trigger]
. The
External Trigger Selection Menu
will be
displayed. Then press [SWEEP] to return to the Sweep Parameters display.
Sweep parameter entry
Start value
(1)
Select the appropriate soft key to enter the start value, e.g.
[Start Freq]
.
(2)
Enter the required start value via the numerical key pad and the appropriate
terminator key.
Stop value
(1)
Select the appropriate soft key to enter the stop value, e.g.
[Stop Freq]
.
(2)
Enter the required stop value via the numerical key pad and the appropriate
terminator key.
When carrier frequency parameters are entered, the instrument calculates all the
individual step values together with any level and modulation correction factors. While this
process is taking place, the sweep status line changes to indicate '
CALCULATING SWEEP
'.
LOCAL
Internal
Single
Internal
Cont.
External
Trigger
EXIT
Sweep Trigger Mode Menu
C0017
Current Sweep Mode: INTERNAL SINGLE
